Automatic Envirolyte water treatment plant

ELA - 6000

Special appliances with lower salt and electricity consumption are available!

• Simple and safe handling; Fully automated and simple operation
• Self-cleaning
• The strength of the anolyte solution (chlorine concentration) can be adjusted
• Manual control or start and stop with automatic level switches
• All connections are on one side and are easily accessible
• Visual and audible alarm and connection for external signalssupply and starts automatically when water flows
• Reset button
• An outlet control in the hydraulic part blocks the flow in the event of an interruption of the water supply and
  starts automatically when water flows
• Different models with capacities of 40 - 4000 liters per hour available

The Envirolyte plants and devices produce two different activated solutions by electrolysis from salt (brine) and water with polymeric or ceramic membranes by a chemical reaction.

1. Anolyte is a powerful and fast acting disinfectant that kills all known bacteria and viruses within a few minutes.

2. Catholyte is an alkaline solution that dissolves heavy metals from the water and serves as an excellent wash liquid.

Neutral anolyte

ANK-Neutral Anolyte solution is used wherever the pH value is important, eg to avoid corrosion and where possible evaporation of active chlorine is undesirable. Neutral anolyte is highly effective against a wide range of pathogens such as bacteria, viruses, spores, molds and fungi.

Acid anolyte

The acid anolyte solution can be used wherever effective disinfection and sterilization are the main focus, the pH value is not so important and where there is no risk of corrosion. Saueres Anolyte is a very powerful and fast acting disinfectant against all bacteria, viruses, spores, molds, fungi and algae, even when diluted with water or sprayed as an aerosol into the air.

Catholyte solution

The catholyte solution is alkaline and serves as an excellent wash liquid. It also removes heavy metals from the water.

In a typical mode of operation of an Envirolyte device, the anolyte is collected in a container and then metered into the flowing water. The dosage depends on the setting with respect to the amount of water and the quality (properties) of the water and is controlled by a flow meter connected to a dosing pump.

The devices can be stand-alone, eg for spraying, cleaning, CIP disinfection, etc. or they can be used as part of a continuous process in more complex systems. Special customer-specific functions can be integrated.