Automatic Envirolyte water treatment plant

ELA - 2000


Capacity 200 liters per hour
Power Supply 110 - 220V
Power Consumption 2.2 KW / h
Water Supply 2-3 bar
Acid Pump +
Brine pump +
Salt consumption for
1 Liter Anolyte
~ 5-7g depending on the water
(EL-2000 devices with lower salt consumption available)
Control Element Approximation Unitronics / Vision 130
Reactor Type R-200
Genova line system NSF certified;
Pipes & Fittings LLDPE & Kynar
Housing Dimensions & Material 800 x 600 x 300mm Polyester
Mass ~ 25 kg

Special appliances with lower salt and electricity consumption are available!

  • Simple and safe handling; Fully automated and simple operation
  • Self-cleaning
  • The strength of the anolyte solution (chlorine concentration) can be adjusted
  • Manual control or start and stop with automatic level switches
  • All connections are on one side and are easily accessible
  • Visual and audible alarm and connection for external signalssupply and starts automatically when water flows
  • Reset button
  • An outlet control in the hydraulic part blocks the flow in the event of an interruption of the water supply and
    starts automatically when water flows
  • Different models with capacities of 40 - 4000 liters per hour available

The Envirolyte plants and devices produce two different activated solutions by electrolysis from salt (brine) and water with polymeric or ceramic membranes by a chemical reaction.

1. Anolyte is a powerful and fast acting disinfectant that kills all known bacteria and viruses within a few minutes.

2. Catholyte is an alkaline solution that dissolves heavy metals from the water and serves as an excellent wash liquid.

Neutral anolyte

ANK-Neutral Anolyte solution is used wherever the pH value is important, eg to avoid corrosion and where possible evaporation of active chlorine is undesirable. Neutral anolyte is highly effective against a wide range of pathogens such as bacteria, viruses, spores, molds and fungi.

Product

Neutral anolyte

Active chlorine mg / L

500-700

PH value

5 - 8.5

Redox ORP mV

700-900

Acid anolyte

The acid anolyte solution can be used wherever effective disinfection and sterilization are the main focus, the pH value is not so important and where there is no risk of corrosion. Saueres Anolyte is a very powerful and fast acting disinfectant against all bacteria, viruses, spores, molds, fungi and algae, even when diluted with water or sprayed as an aerosol into the air.

Product

Acid anolyte

Active chlorine mg / L

500-700

PH value

2 - 3.5

Redox ORP mV

1000 - 1200

Catholyte solution

The catholyte solution is alkaline and serves as an excellent wash liquid. It also removes heavy metals from the water.

Product

Catholyte (sodium hydroxide)

PH value

10-13

Redox ORP mV

-900 - 950

In a typical mode of operation of an Envirolyte device, the anolyte is collected in a container and then metered into the flowing water. The dosage depends on the setting with respect to the amount of water and the quality (properties) of the water and is controlled by a flow meter connected to a dosing pump.

The devices can be stand-alone, eg for spraying, cleaning, CIP disinfection, etc. or they can be used as part of a continuous process in more complex systems. Special customer-specific functions can be integrated.

The anolyte solutions are:

  • Environmentally friendly
  • Nontoxic for humans and animals
  • Very effective and fast-acting biocides
  • Can safely be disposed of in waste water
  • Can be used in all stages of disinfection
  • Reliably remove the biofilm
  • Do not affect surfaces or materials when observing the concentration recommendations
  • Can be used in liquid form, as ice or aerosol (mist) - can be produced on site, which means that handling and storage of chemicals is no

Typical installation of an Envirolyte system

If you have any further questions or would like an individual consultation, please.Contact us

Our equipment and systems are used more and more frequently in legionella disposal in the drinking and swimming water of hotels, hospitals and old people's homes.

Industry has long recognized the advantages of our technology. Breweries and beverage manufacturers use our latest development equipment with a salt consumption of 1.1 grams per liter of product - for bottle disinfection, as well as disinfection of conveyor belts and other production units.

We have been able to drastically reduce the problems of agriculture and animal husbandry in collaboration with farmers over many years through practical experience.

Through our many years of experience and the positive feedback from our numerous customers from various divisions, we are constantly researching and developing this unique technology.

Our self-imposed quality standards, our customer service and the more than 5,000 installed installations worldwide confirm the success of our technology.

Our main interest is the profitability of your investment. Thanks to the strength of our technology, the flexibility of our systems and, last but not least, an absolutely fair price policy, the profitability of our equipment is guaranteed. Contact us so that we can provide you with a non-binding offer, tailored to your specific needs. We look forward to answering your questions.

Sign up to our

newsletter

© 2024 Envirolyte Asia Pacific - Lifestyle and Environment WEB DESIGN BY YOUR PAGE